·       Maximum range open field (detector to smart hub): 30 m

·       Maximum range indoor (detector to smart hub): 10 m

·       Communication protocol: Zigbee® 3.0

·       Input voltage: battery CR2450

·       Detector output: 230 V (ON/OFF)

·       Detection angle: 110 °

·       Detection range (PIR): ø 5 m from a height of 2,5 m

·       Ambient temperature: 0 – +40 °C

·       Mounting method: surface mounting

·       Mounting height: 2.5 – 2.8 m

·       Dimensions (HxWxD): 51 x 51 x 34 mm

·       Weight: 69 g

·       Operating frequency: 2.4 GHz

·       Maximum radio frequency power: 7 dBm

·       Protection degree: IP20

·       Marking: CE

Connected dimmer, base, 3 – 200 W, 2-wire, 60 x 71 mm, claw fixing, Zigbee®.

• Power supply: 230 Vac (only L-wire required)
• Protocol: Zigbee® 3.0, 2.4 GHz
• Mounting method: wall mounting
• Mounting height: 110 - 120 cm
• Maximum range (from switch to smart hub): 10 m
• Operating frequency: 2.4GHz
• Maximum frequency power: 10 dBm
• Load: 3 - 200 W
• LED colour: white
• Protection degree: IP20
• Flush-mounting depth: 40 mm
• Maximum number per Installation: 50 connected Zigbee® devices
• Marking: CE
• Function: Universal flush-mounting dimmer plus with push button control for capacitive, inductive and resistive loads, including dimmable LED lamps. Reverse phase control for resistive and capacitive loads. Phase control for inductive loads.
• Minimum load: 3 W
• Maximum load ferromagnetic transformer: 200 VA
• Hum-free: yes
• PLC interference suppression: this dimmer is equipped with interference suppression of PLC signals (frequency dips up to 3 Hz). This integrated interference suppression attempts to remove as many interfering signals as possible from the mains in order for most lamps to function optimally, without flashing or humming.
• Protection from overload: thermal overload protection. Protection against repetitive overload. Automatic reset function of the protections.
• Short circuit proof: electronic short-circuit protection
• Flush-mounting frame
  • 1 mm-thick metal
  • galvanized on all sides after cutting, even on the cut edges
  • with 4 grooves with screw hole of 7 mm
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Fixing method
  • simple mounting in a flush-mounting box with grip surfaces
  • with claws that rotate open using screws with a combination screwhead (Pz2 or slot 1 x 5.5 mm), for mounting in a flush-mounting box with grip surfaces
  • engagement depth of claws: 23.5 mm
  • claws turn back completely when loosened
• Wire capacity
  • 1 x 2.5 mm² per connection terminal
• Centre-to-centre distance
  • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
  • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
  • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
  • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
  • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
• Ambient temperature: 0 – +35 °C
• Protection degree: IP20
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Dimensions (HxWxD): 71 x 73 x 40.5 mm
• Marking: CE